Hawthorne Wireless - Quick Start Guide

There are 3 different wireless networks you can connect to. Here is a quick start guide to the wireless networks.

Phones, laptops, and tablets

Any devices that supports a username and password for wireless should connect to HawthorneNET. This is the primary network and you login with your email address and password.

Guests and Visitors

Anyone who is visiting on campus and does not have an Endicott email address should use the network called HawthorneGUEST. When connecting to this network your device should launch a captive portal page shown below.  Visitors should select the “Visitors and Guests” tile and then accept the end user agreement to get internet access for 24 hours.

 

 

Gaming Consoles, Smart TVs, IoT, and all other special devices

Any Endicott resident device which does not support connecting to HawthorneNET needs to connect to HawthorneDEVICE. The password is “endicottcollege”.

 

Then you will need to login with your email address and password to get the device to register on the portal web page. After registration you should get internet access.

 

 

Or alternatively you can go to http://macregex.endicott.edu/ to register a device by the mac address. Login with your Endicott email address and password. 

At this point you will be able to register your device mac address. It is a 12-digit ID made of letters and numbers. The format is xx:xx:xx:xx:xx:xx

You can register a device as a “gaming device” or a regular “building network” device.

 will then be able to connect the device by simply using the password and you should be connected.